HF 230.7 AI 18 CFHKMPRSVW
The spindle motor is an asynchronous motor type.
Ceramic Hybrid Ball Bearings
The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.
Grease-packed ball bearings
The ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details.
Flange for axial mount of the motor spindle
A flange on the housing enables an axial mount of the motor spindle. Note the spindle drawing for details.
Option "G" avoids a static overload due to processing and friction on non- conducting materials..
Hydraulic Tool Change
The motor spindle is equipped with a tool change by hydraulic pressure. Option "H" shortens the motor spindle. Note the drawing for details.
HSK Tooling System
The motor spindle is equipped with a tooling interface HSK. Note the spindle description and drawing for size and design.
Hydraulic preload for higher axial stiffness
Option "R" enables a flexible hydraulic preload of the spindle shaft while running the process. This allows high force in the process if needed, but spindle maximum speed when it’s possible.
Encoder for Vector Control and Shaft Positioning
The integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details.
Tool Cooling through the spindle centre
The motor spindle is equipped with a Rotary Coupling for Tooling through the spindle centre. Option "W" is available for selected spindle types either with 80, 150 or 200bar. Option "W" is only available in combination with Option "H" and extends the motor spindle. Note the spindle description and drawing for details.
|Additional Options|| |
Tool Holder Sensor
The motor spindle is equipped with sensors to check the tool holder position. Three sensors (Tool-Out (TO) / Tool-In (TI) / No-Tool (NT)) ensure a save automatic tool change. For selected motor spindles there is also an additional Piston-In (PI) sensor available. Option "I3" ensure a save speed start after ATC. Note the drawing for details.
The motor spindle has an oil extraction system to vacuum excess oil. Option "L" reduces excess oil drops on the work piece.
|Way of cooling|| |
Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C.
|Alternative tooling systems||,|