HF 80.2 M 40 CFKPW

HF 80.2 M 40 CFKPW - Drawing No. 080M40KW-00-
HF 80.2 M 40 CFKPW - Drawing No. 080M40KW-00-
Drawing
Diagram
STEP-File
Standard Option
HF

The spindle motor is an asynchronous motor type.

M

The Motor Spindle is equipped with a taper system for manual tool changing (e.g. HSK-C). Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

P

Grease-packed ball bearings

The ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details.

F

Flange for axial mount of the motor spindle

A flange on the housing enables an axial mount of the motor spindle. Note the spindle drawing for details.

W

Tool Cooling through the spindle centre

The motor spindle is equipped with a Rotary Coupling for Tooling through the spindle centre. Option "W" is available for selected spindle types either with 80, 150 or 200bar. Option "W" is only available in combination with Option "H" and extends the motor spindle. Note the spindle description and drawing for details.

Additional Options
G

Antistatic Brushes

Option "G" avoids a static overload due to processing and friction on non- conducting materials..

V

Encoder for Vector Control and Shaft Positioning

The integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details.

Speed

Oil-Air (min-1)
CC-Grease (min-1)
Grease (min-1)40'000
PowerS6-40% (kW)3.250
S1 (kW)2.500
TorqueS6-40% (Nm)0.780
S1 (Nm)0.600
Tooling system DIN 69893 HSK-C25
Frequency(Hz) 1'667
Voltage(V) 380
Current(A) 7.5
Bearings(Pce.)4
Housing Diameter(mm)80
Spindle length(mm)310
Spindle weight (g) 7'330
Way of cooling
Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C.
Alternative tooling systems ,