HT 25.1 S 100 CUP
Standard Option | HT The spindle motor is a synchronous motor type. S The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design. C Ceramic Hybrid Ball BearingsThe motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles. P Grease-packed ball bearingsThe ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details. U Mega-xS Tooling System"U" is a high accuracy collet system with a runout in the collet of 1 μm. |
Additional Options | E Spindle Housing ExtensionThe housing of the motor spindle is extended. Note the spindle drawing for details. |
Speed | Oil-Air (min-1) | |
CC-Grease (min-1) | ||
Grease (min-1) | 60'000 | |
Power | S6-40% (W) | 364 |
S1 (W) | 280 | |
Torque | S6-40% (Ncm) | 6.5 |
S1 (Ncm) | 5 |
Tooling system | Typ MEGA 3S |
Frequency | (Hz) | 1'000 |
Voltage | (V) | k.A. |
Current | (A) | k.A. |
Bearings | (Pce.) | 3 |
Housing Diameter | (mm) | 25 |
Spindle length | (mm) | 104 |
Spindle weight | (g) | 261 |
Way of cooling | Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C. |
Alternative tooling systems | Typ ER 8-UP, |