HFK 95.1 M 40 CP

HFK 95.1 M 40 CP - Drawing No. 095M40P-0A
HFK 95.1 M 40 CP - Drawing No. 095M40P-0A
Drawing
Diagram
STEP-File
Standard Option
M

The Motor Spindle is equipped with a taper system for manual tool changing (e.g. HSK-C). Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

P

Grease-packed ball bearings

The ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details.

Additional Options
G

Antistatic Brushes

Option "G" avoids a static overload due to processing and friction on non- conducting materials..

L

Oil Extraction

The motor spindle has an oil extraction system to vacuum excess oil. Option "L" reduces excess oil drops on the work piece.

R

Hydraulic preload for higher axial stiffness

Option "R" enables a flexible hydraulic preload of the spindle shaft while running the process. This allows high force in the process if needed, but spindle maximum speed when it’s possible.

V

Encoder for Vector Control and Shaft Positioning

The integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details.

Speed

Oil-Air (min-1)
CC-Grease (min-1)
Grease (min-1)42'000
PowerS6-40% (kW)1.300
S1 (W)1000
TorqueS6-40% (Nm)0.299
S1 (Nm)0.230
Tooling system DIN 69893 HSK-C25
Frequency(Hz) 700
Voltage(V) 140
Current(A) 7.5
Bearings(Pce.)
Housing Diameter(mm)90
Spindle length(mm)153
Spindle weight (g) 6'500
Way of cooling
Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C.
Alternative tooling systems ,