HF 230.5 AI 17 CFHKV
| Standard Option | HF The spindle motor is an asynchronous motor type. C Ceramic Hybrid Ball BearingsThe motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles. F Flange for axial mount of the motor spindleA flange on the housing enables an axial mount of the motor spindle. Note the spindle drawing for details. G Antistatic BrushesOption "G" avoids a static overload due to processing and friction on non- conducting materials.. H Hydraulic Tool ChangeThe motor spindle is equipped with a tool change by hydraulic pressure. Option "H" shortens the motor spindle. Note the drawing for details. K HSK Tooling SystemThe motor spindle is equipped with a tooling interface HSK. Note the spindle description and drawing for size and design. V Encoder for Vector Control and Shaft PositioningThe integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details. |
| Additional Options | I Tool Holder SensorThe motor spindle is equipped with sensors to check the tool holder position. Three sensors (Tool-Out (TO) / Tool-In (TI) / No-Tool (NT)) ensure a save automatic tool change. For selected motor spindles there is also an additional Piston-In (PI) sensor available. Option "I3" ensure a save speed start after ATC. Note the drawing for details. K HSK Tooling SystemThe motor spindle is equipped with a tooling interface HSK. Note the spindle description and drawing for size and design. L Oil ExtractionThe motor spindle has an oil extraction system to vacuum excess oil. Option "L" reduces excess oil drops on the work piece. R Hydraulic preload for higher axial stiffnessOption "R" enables a flexible hydraulic preload of the spindle shaft while running the process. This allows high force in the process if needed, but spindle maximum speed when it’s possible. W Tool Cooling through the spindle centreThe motor spindle is equipped with a Rotary Coupling for Tooling through the spindle centre. Option "W" is available for selected spindle types either with 80, 150 or 200bar. Option "W" is only available in combination with Option "H" and extends the motor spindle. Note the spindle description and drawing for details. |
| Speed | Oil-Air (min-1) | 17'000 |
| CC-Grease (min-1) | 15'000 | |
| Grease (min-1) | 13'000 | |
| Power | S6-40% (kW) | 39.000 |
| S1 (kW) | 30.000 | |
| Torque | S6-40% (Nm) | 95.940 |
| S1 (Nm) | 73.800 |
| Tooling system | HSK-A63 |
| Frequency | (Hz) | 850 |
| Voltage | (V) | 380 |
| Current | (A) | 106 |
| Bearings | (Pce.) | 4 |
| Housing Diameter | (mm) | 230 |
| Spindle length | (mm) | 624 |
| Spindle weight | (g) | 130'548 |
| Way of cooling | Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C. |
| Alternative tooling systems | HSK-A80, |