HT 16 S 100 C

HT 16 S 100 C - with 180° connector
HT 16 S 100 C - with 180° connector
HT 16 S 100 C - with 90° connector
HT 16 S 100 C - with 90° connector
HT 16 S 100 C - with excenter housing and gear wheel
HT 16 S 100 C - with excenter housing and gear wheel
HT 16 S 100 C - with excenter housing
HT 16 S 100 C - with excenter housing
Drawing
Diagram
STEP-File
Standard Option
HT

The spindle motor is a synchronous motor type.

S

The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

Additional Options
Speed

Oil-Air (min-1)100'000
CC-Grease (min-1)
Grease (min-1)
PowerS6-40% (W)208
S1 (W)160
TorqueS6-40% (Ncm)2.5
S1 (Ncm)1.9
Tooling system Typ D 6-UP
Frequency(Hz) 1'667
Voltage(V) k.A.
Current(A) k.A.
Bearings(Pce.)3
Housing Diameter(mm)16
Spindle length(mm)107
Spindle weight (g) 157
Way of cooling
Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C.
Alternative tooling systems ,