HF 33 A 60 CH
| Standard Option | HF The spindle motor is an asynchronous motor type. A The motor spindle is equipped with an automatic tooling system. Note the spindle description and drawing for size and design. C Ceramic Hybrid Ball BearingsThe motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles. H Hydraulic Tool ChangeThe motor spindle is equipped with a tool change by hydraulic pressure. Option "H" shortens the motor spindle. Note the drawing for details. |
| Additional Options |
| Speed | Oil-Air (min-1) | 60'000 |
| CC-Grease (min-1) | ||
| Grease (min-1) | 60'000 | |
| Power | S6-40% (W) | 260 |
| S1 (W) | 200 | |
| Torque | S6-40% (Ncm) | 4.6 |
| S1 (Ncm) | 3.5 |
| Tooling system | P6 /max. Ø4 |
| Frequency | (Hz) | 1'000 |
| Voltage | (V) | 30 |
| Current | (A) | 6.4 |
| Bearings | (Pce.) | 4 |
| Housing Diameter | (mm) | 33 |
| Spindle length | (mm) | 175 |
| Spindle weight | (g) | 761 |
| Way of cooling | Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C. |
| Alternative tooling systems | , |