HT 30.3 S 80 CPS
Standard Option | HT The spindle motor is a synchronous motor type. S The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design. C Ceramic Hybrid Ball BearingsThe motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles. P Grease-packed ball bearingsThe ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details. |
Additional Options |
Speed | Oil-Air (min-1) | |
CC-Grease (min-1) | ||
Grease (min-1) | 40'000 | |
Power | S6-40% (W) | 390 |
S1 (W) | 300 | |
Torque | S6-40% (Ncm) | 9.4 |
S1 (Ncm) | 7.2 |
Tooling system | Typ ER 11-UP |
Frequency | (Hz) | 667 |
Voltage | (V) | k.A. |
Current | (A) | k.A. |
Bearings | (Pce.) | 3 |
Housing Diameter | (mm) | 30 |
Spindle length | (mm) | 133 |
Spindle weight | (g) | 460 |
Way of cooling | Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C. |
Alternative tooling systems | , |