HTR 25 S 100 CS
| Standard Option | S The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design. C Ceramic Hybrid Ball BearingsThe motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles. |
| Additional Options | E Spindle Housing ExtensionThe housing of the motor spindle is extended. Note the spindle drawing for details. U Mega-xS Tooling System"U" is a high accuracy collet system with a runout in the collet of 1 μm. |
| Speed | Oil-Air (min-1) | 80'000 |
| CC-Grease (min-1) | ||
| Grease (min-1) | 60'000 | |
| Power | S6-40% (W) | 316 |
| S1 (W) | 243 | |
| Torque | S6-40% (Ncm) | 4.9 |
| S1 (Ncm) | 3.8 |
| Tooling system | Typ ER 8-UP |
| Frequency | (Hz) | 1'333 |
| Voltage | (V) | k.A. |
| Current | (A) | k.A. |
| Bearings | (Pce.) | 3 |
| Housing Diameter | (mm) | 25 |
| Spindle length | (mm) | 100 |
| Spindle weight | (g) | 460 |
| Way of cooling | Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C. |
| Alternative tooling systems | Typ MEGA 3S, |