HT 16 S 100 CPS

HT 16 S 100 CPS - with 180° connector
HT 16 S 100 CPS - with 180° connector
HT 16 S 100 CPS - with 90° connector
HT 16 S 100 CPS - with 90° connector
HT 16 S 100 CPS - with excenter housing and gear wheel
HT 16 S 100 CPS - with excenter housing and gear wheel
HT 16 S 100 CPS - with excenter housing
HT 16 S 100 CPS - with excenter housing
Drawing
Diagram
STEP-File
Standard Option
HT

The spindle motor is a synchronous motor type.

S

The collet tooling system is standard for all motor spindles with manual tool changing. Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

P

Grease-packed ball bearings

The ball bearings are greased-packed. Option "P" limits motor spindle maximum speed. Note the motor diagram for details.

Additional Options
Speed

Oil-Air (min-1)
CC-Grease (min-1)
Grease (min-1)60'000
PowerS6-40% (W)156
S1 (W)120
TorqueS6-40% (Ncm)2.5
S1 (Ncm)1.9
Tooling system Typ D 6-UP
Frequency(Hz) 1'000
Voltage(V) k.A.
Current(A) k.A.
Bearings(Pce.)3
Housing Diameter(mm)34
Spindle length(mm)125
Spindle weight (g) 644
Way of cooling
Motor spindle without cooling. The Heat must be dissipated via spindle holder. Maximum external housing temperature is 60°C.
Alternative tooling systems ,