HF 110.2 A 30 BCFHVW

HF 110.2 A 30 BCFHVW - Drawing No. 110A30BFHW-01-
HF 110.2 A 30 BCFHVW - Drawing No. 110A30BFHW-01-
Drawing
Diagram
STEP-File
Standard Option
HF

The spindle motor is an asynchronous motor type.

A

The motor spindle is equipped with an automatic tooling system. Note the spindle description and drawing for size and design.

C

Ceramic Hybrid Ball Bearings

The motor spindle is built with Ceramic Hybrid Ball Bearings. Option "C" is standard for most of IBAG motor spindles.

B

(B)BT, CAT or SK Tooling System

The tooling is a taper system (B)BT, CAT or SK. Note the spindle description and drawing for size and design.

F

Flange for axial mount of the motor spindle

A flange on the housing enables an axial mount of the motor spindle. Note the spindle drawing for details.

H

Hydraulic Tool Change

The motor spindle is equipped with a tool change by hydraulic pressure. Option "H" shortens the motor spindle. Note the drawing for details.

V

Encoder for Vector Control and Shaft Positioning

The integrated rotary pulse generator "V" achieves full torque even on low speed. With "V" you can stop the spindle shaft orientated. Note the spindle description and drawing for details.

W

Tool Cooling through the spindle centre

The motor spindle is equipped with a Rotary Coupling for Tooling through the spindle centre. Option "W" is available for selected spindle types either with 80, 150 or 200bar. Option "W" is only available in combination with Option "H" and extends the motor spindle. Note the spindle description and drawing for details.

Additional Options
G

Antistatic Brushes

Option "G" avoids a static overload due to processing and friction on non- conducting materials..

I

Tool Holder Sensor

The motor spindle is equipped with sensors to check the tool holder position. Three sensors (Tool-Out (TO) / Tool-In (TI) / No-Tool (NT)) ensure a save automatic tool change. For selected motor spindles there is also an additional Piston-In (PI) sensor available. Option "I3" ensure a save speed start after ATC. Note the drawing for details.

K

HSK Tooling System

The motor spindle is equipped with a tooling interface HSK. Note the spindle description and drawing for size and design.

L

Oil Extraction

The motor spindle has an oil extraction system to vacuum excess oil. Option "L" reduces excess oil drops on the work piece.

Speed

Oil-Air (min-1)30'000
CC-Grease (min-1)
Grease (min-1)28'000
PowerS6-40% (kW)10.400
S1 (kW)8.000
TorqueS6-40% (Nm)7.930
S1 (Nm)6.100
Tooling system BBT30
Frequency(Hz) 1'000
Voltage(V) 380
Current(A) 21
Bearings(Pce.)4
Housing Diameter(mm)110
Spindle length(mm)460
Spindle weight (g) 24'130
Way of cooling
Motor spindle with internal cooling to achieve highest power performance. The cooling temperature is between 24 – 26°C.
Alternative tooling systems HSK-E40,